RV180W doesn't do Firmware Upgrade / IPSec VPN with Windows 7?
today I got my RV180W - I wanted to update the firmware from 126.96.36.199 to 188.8.131.52 or 184.108.40.206 - but both don't work. It seems like the router does the upgrade but after the restart I still have 220.127.116.11 on the router...
And I have another question - is it possible to connect to the router via IPSec and Windows 7? I found another thread which says no but Windows 7 should be capabable of doing IPSec connections? I don't want to use a separate software nor do I like to use PPTP.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...