I have a Cisco RV180w router that I am having problems with the SIP ALG. I have the SIP ALG enable to do NAT but when making calls on VoIP phones in the same network I get no audio. This is telling me that SIP ALG is not working properly and the router is getting confused with a call origniating inside the LAN and calling another phone within the LAN.
I am able to make inbound and outbound calls just not agent to agent when in the same LAN. What other configuration can I go to make this work?
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...