RV180W: uses only port 443 even with quickvpn set to 60443; sbs2011 need tochange
I have just purchased 2 rv180w routers, one for new sbs2011 and one for vpn to vpn gateway to a branch office. seems to work well. Now I want to use QuickVPN from client's desktops at home and on the road to vpn into main site. I have set quickvpn up with use 60443 but the router at the main office shows only 443 being accessed from remote IP address. Can't use 443 with sbs2011 need way to open 60443 on router for user vpn to main office.
This problem is worse and may result in me junking the rv180W altogether. The SBS 2011 platform relies on port 443 for most of it's remote capabilities. I just tired enabling remote management on the routers and now my public web page https://remote.fhfhhfhfhhf.com gets to the router logon and not the RWW or OWA pages.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...