RV215 QuickVPN users cannot share resources to the LAN network?
the Documentation on my new RV215 is muddy at best and I need some help
We bought this router because I need (1) of my remote users to be able to share their local printer back to the server on my local lan behind the RV215
I can establish a QuickVPN connection but since the RV215 does not report the remote LAN IP address assigned to the remote user there is no way to browse to the resources on the end computer. Also since there appears to be no way to determine what IP's the RV215's DHCP server is assigning to remote users I cannot seem to find the info that way either.
Is it not possible to share resources from the remote computers back to devices on the LAN?
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...