I am having issue accessing files over VPN ipsec tunnel. This is mostly new to me due to never having to use VPN before and looking for some help/guidence.
I have two offices Office A uses 192.168.1.1, Office B uses 192.168.2.1 both subnets are 255.255.255.0 and the ipsec tunnel in the router shows to be established.
From Office A, I can ping Office B router "192.168.2.1" but unable to access or ping an actual computer "192.168.2.1:109"
We run Windows 7 on all computers and the workgroup name is set the same on all computers as well.
Should I not be able to see all the (Office B) computers in the network folder on windows since the sites are connected??
I was under the understanding when we got these two routers that after they were connected via static ip address and set up that the locations would be on the same network and be able to print and see each other as if we was all in the same location.
We are using a peer-peer network at each small office / no servers.
My end goal is to access files at office B and printing from A-B or B-A. I would like for all the computers to show up in the network or homegroup option if possible.
Also do I have to create a VPN connection from the computer I am working from to the other office location even while the routers are still talking together, or is that just for a mobile unit like laptop at home??
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...