RV220W error /pfrm2.0/bin/bwLimitConfig /tmp/system.db

[richard]

Hi,

i am getting the following errors constantly:

[System] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 9 dot11STA 1 failed. status=-1

[System] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 1 failed. status=-1
 

I can reproduce the problem if i turn off and on the wlan on my iphone.

What i already tried to fix the problem:

.) Resetted to factory defaults, uploaded the actual firmware 1.0.5.8 and configured all my settings manually

.) Played around with the wlan settings

I've already seen many threads with the problem, so there are many people out with the same problem.

Any hints? Any tips? Anyone got this error fixed?

Best regards

Richard

[Ismael Arroyo]

richard@marschik.biz,

Thank you for the post. I was able to find a different thread, maybe you have already come across, but if not then it would be worth looking at. The below thread involved android phones connecting to the RV220w not sure if this is your scenerio. Hope this helps. If issue still follows i would like to encourage you to open a support ticket.

https://supportforums.cisco.com/thread/2088741