Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

RV220W sip problem

I have installed 2 RV220w routers and 5 RV120w routers on a 7 site vpn ( all with the latest 10.5.8 furnware)

I am running an Elastix 2.4 asterisk based pbx

The issue I am having is this:

With the sip alg disabled and the port forward set for 5060 udp and 10000-20000 udp I cannont recieve sip calls

With the sip alg enabled and the port forward set for 5060 udd and 10000-20000 upd I can reiceive calls BUT

the rtp packets are coming at any random port 9000 to 50000

Aparently the sip alg is rewriting the sip header causing this

Normally I would run this with the sip alg turned off but in that mode I cannot get the sip port to pass calls at all

I am thinking of downgrading the firmware to the 10.4.17

Does anyone have experience with this

Thanks

1 REPLY
Gold

RV220W sip problem

Please see the following thread:

https://supportforums.cisco.com/thread/2269123

- Marty

198
Views
0
Helpful
1
Replies