I have a new RV220w (USA version) that arrived with the late 2011 firmware v184.108.40.206 pre-installed from the factory. It appears the SSL VPN Bug CSCtr88429 mentioned as solved in the release notes is NOT resolved. I'm having the same issues mentioned here and other places on the forum when trying to get the clientless SSL VPN to launch on two separate Macs with OSX 10.7 Lion and latest Java package. When logged in as an admin account and launching into the SSL VPN portal (in safari or firefox) I get the error:
- "Needed permissions couldn't be set on some files. Root privleges are required for setting permissions.
Please let me know if there is a new work around or if Cisco engineers are reopening bug CSCtr88429 to actually fix it. My company has more and more Mac's and I really need to find a way to get remote SSL VPN working. Thanks in advance for any help.
I apologize for the issue that you are experiencing. The release notes for the 220.127.116.11 firmware clearly indicate that the issue was resolved, however, your scenario is proving otherwise. I would suggest reflashing the firmware, factory resetting, and manually configuring the RV220w. Below is a link to the 18.104.22.168 firmware. Please be sure to use a browser other than IE9 and to either use the GUI to reset or press the reset button for 45 seconds. If the issue still persists you will need to call 1.866.606.1866 and open a support ticket so that we can get this issue resolved for you as quickly as possible.
Configure DHCP WAN Settings on the RV34x Router
A Wide Area Network (WAN) is a network that covers a broad area. A user or network of users can connect to the Internet through an Internet Service Provider (ISP) who offer...
Configure Static IP WAN Settings on the RV34x Router
A Wide Area Network (WAN) is a network that covers a broad area. A user or network of users can connect to the Internet through an Internet Service Provider (ISP) who ...