Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RV220W The server is down.Could not read headers.

The server is down.

Could not read headers.

SERVERDOWN.PNG

Everyone's tags (5)
9 REPLIES
New Member

RV220W The server is down.Could not read headers.

It happened to me as well. I have no idea what it means.

New Member

Re: RV220W The server is down.Could not read headers.

I am stumped myself. When i got the error i was streaming Video & Uploading some files....

Are you using beta firmware 1.0.4.17?

Do you use ProtectLink?

Have you checked Enable Check Referrer under URL filtering?

Do you have overflow control set to bypass?

Was there high traffic when the server went down?

Here is what the help page says:

Enable Check Referer:

Check the box to enable checking the  HTTP referer header for allowed URLs. When enabled, this feature allows a user  to access a link on an allowed web page even if the link goes to a different  domain.

Silver

Re: RV220W The server is down.Could not read headers.

This shouldnt be 1.0.4.17 as the copyright notice is dated 2012. guys did you reboot the Router? looks like one of the services has dropped.

if you have upgraded to 1.0.4.17 then maybe the update has not been applied correctly and a full reset maybe in order.  i have not experienced this error on my RV220W and i've been running 1.0.4.17 from July.

Regards Simon
http://www.linksysinfo.org

Regards Simon http://www.linksysinfo.org
New Member

Re: RV220W The server is down.Could not read headers.

This is 1.0.4.17 and I've only seen this notice using this particular firmware version. I don't use ProtectLink.

Silver

Re: RV220W The server is down.Could not read headers.

Mine reports 2012 copyright at bottom of screen. when logging in. did you do a full reset when upgrading or not?

Regards Simon
http://www.linksysinfo.org

Regards Simon http://www.linksysinfo.org
New Member

Re: RV220W The server is down.Could not read headers.

Mine also reports 2012 copyright at the bottom of the screen but this particular notice has a 2010 copyright. They probably forgot to change it.

New Member

Re: RV220W The server is down.Could not read headers.

I did not do a full reset but left all my settings intact.

Perhaps a full reset would help?

New Member

RV220W The server is down.Could not read headers.

i also have this problem, i didn't do full reset after upgrade the firmware.also i have another problem with it.it resters itself 1-2 times/day and the wireless clients also need to reconnect manually.it's a firmware problem or hardware problem?thanks.

RV220W The server is down.Could not read headers.

Hi,

Was this solve?

Got this problem too.

What do you mean by full reset?

Thanks,

Al

1782
Views
0
Helpful
9
Replies
CreatePlease login to create content