In troubleshooting an IPSec connection issue I narrowd it down to a <bug> in the Timezone setting for GMT-8 Pacific Standard Time.
When I have the timezone set for GMT-8 Pacific Standard Time and the NTP server set to the same as my ASA, the time is off Exactly 8 Hours.
I set it to GMT -12 Marshall Islands, its off 4 hours, which is Correct. I set it to GMT-10, its off 2 hours, Correct. Back to GMT-8 Pacific Standard Time. and its off 8 hours. I then set it to GMT-8 Pitcairn Island Time and it is Correct.
There seems to be something wrong with GMT-8 Pacific Standard Time??
I'm running Software Version: 126.96.36.199. This happens on two units that I have.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...