In the web GUI, go to Cisco protect link web, then global settings then approved clients. Ensure that Approved Clients List is set to Enable. Then add the ip addresses of the machines you want to have unrestricted web access. You may want to set those clients with static IPs rather than dhcp for this to be effective.
Sorry, yes, there is some limited (by URL/keyword) filtering under Firewall, as opposed to Cisco ProtectLink (which filters by category). It appears to me that you are only able to set unrestricted approved clients under protectlink. I will confirm and let you know if otherwise.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...