Ugh. I've spent endless hours trying to get the VPN to work. I've done all the recommended actions for QuickVPN (run as Vista SP2, disable avast, enable windows firewall, disable windows defender, create windows ICMPv4 rules, turned on IPSEC services, disabled other network adapters) but I can NEVER connect. It always comes up with waiting for network.
I set up PPTP today. And it worked partially. I was able to access the RV220W but unable to browse any other networked devices or even access the internet. I ran the windows diagnostic tool and it said it was a DNS issue on the remote side.
Can someone please guide me before I end up ripping this device off the network? Much appreciated!
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...
Article ID:541 Firmware Upgrade on RV016, RV042, RV042G, and RV082 VPN
Routers Objective To upgrade the firmware, a specific file must be
downloaded from the Internet and uploaded to the device. Firmware
upgrades can fix software bugs, improve features, a...