We have Serveral Access Points setup in many Office with the same SSID so users can connect to the one SSID with the same Key and wonder around. The key is just a bunch of numbers.
Though when I enter my Key in the RV220W, it says its not strong enough and I need to make it better. Why cant that be a Warning and not a requirement? Now I have to Create a new SSID and new Key just for the RV220W sites?
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...