RV320 accep 2 IP Statics in one Wan Port

[it000000225S]

hi, i need know if the RV320 accept two or more IP for one WAN Port, in other words, i need configure this:

WAN1 --> IP xxx.xxx.xxx in Vlan 120 (Internet connection)

WAN1 --> IP xxx.xxx.xxx in Vlan 20 (VPN Connection)

WAN2 --> IP xxx.xxx.xxx (Internet Failover)

that is possible with RV320?

sorry for my bad English.

Melhores cumprimentos - Best regards - Cordialement - Mit besten   Grüßen – Saludos cordiales - مع أطيب التحيات -  最好的问候
	Eng. Victor   Parada IT   Manager  |  Depto. IT support@omnisantos.com |  M: +351 910   335 993  |  Skype: viktorfreire |  In: http://pt.linkedin.com/pub/victor-manuel-freire-parada/4b/109/a3b/pt Rua Almirante Gago Coutinho n.º 277, 2670-641
P  Tenha o   ambiente em consideração: Antes de imprimir este e-mail, verifique se   necessita da impressão!

[Zhaoqiang Wang]

Hi Victor

RV320's multiple public addresses are mainly for static NAT. If you want WAN carries different vlan tags (sub-interface?), you can use RV315W.

[it000000225S]

I do not understand.

My question is simple, can configure in the same WAN Port 2 Static IP, one in the 120 VLAN and other in 20 VLAN???

[Michiel Beenen]

Victor,

What Zhaogiang is trying to say is that the RV320 can do:

- WAN IP > Internal IP (as many as you want)

but it cannot do WAN IP > Internal IP Separate VLAN.

[it000000225S]

thanks for your help.

now, which model do you recommend to do this job?

[it000000225S]

guys the Cisco 1941/k9 is good for my project?

[Marcelo Demello]

Hi, Victor,

Cisco Small Bussiness routers do not support this type of configuration.

The 1900 series routers are part of entreprise, for further assistance, please call 1-866-425-5351.

Regards,

Marcelo