Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RV320 accep 2 IP Statics in one Wan Port

hi, i need know if the RV320 accept two or more IP for one WAN Port, in other words, i need configure this:

WAN1 --> IP xxx.xxx.xxx in Vlan 120 (Internet connection)

WAN1 --> IP xxx.xxx.xxx in Vlan 20 (VPN Connection)

WAN2 --> IP xxx.xxx.xxx (Internet Failover)

that is possible with RV320?

sorry for my bad English.

Melhores cumprimentos - Best regards - Cordialement - Mit besten   Grüßen – Saludos cordiales - مع أطيب التحيات -  最好的问候 

Eng. Victor   Parada

IT   Manager  |  Depto. IT

support@omnisantos.comM: +351 910   335 993  |  Skype: viktorfreire |  In: http://pt.linkedin.com/pub/victor-manuel-freire-parada/4b/109/a3b/pt

Rua Almirante Gago Coutinho n.º 277, 2670-641

P  Tenha o   ambiente em consideração: Antes de imprimir este e-mail, verifique se   necessita da impressão!

6 REPLIES
Cisco Employee

RV320 accep 2 IP Statics in one Wan Port

Hi Victor

RV320's multiple public addresses are mainly for static NAT. If you want WAN carries different vlan tags (sub-interface?), you can use RV315W.

New Member

RV320 accep 2 IP Statics in one Wan Port

I do not understand.

My question is simple, can configure in the same WAN Port 2 Static IP, one in the 120 VLAN and other in 20 VLAN???

New Member

RV320 accep 2 IP Statics in one Wan Port

Victor,

What Zhaogiang is trying to say is that the RV320 can do:

- WAN IP > Internal IP (as many as you want)

but it cannot do WAN IP > Internal IP Separate VLAN.

New Member

RV320 accep 2 IP Statics in one Wan Port

thanks for your help.

now, which model do you recommend to do this job?

New Member

RV320 accep 2 IP Statics in one Wan Port

guys the Cisco 1941/k9 is good for my project?

Cisco Employee

RV320 accep 2 IP Statics in one Wan Port

Hi, Victor,

Cisco Small Bussiness routers do not support this type of configuration.

The 1900 series routers are part of entreprise, for further assistance, please call 1-866-425-5351.

Regards,

Marcelo

720
Views
5
Helpful
6
Replies
CreatePlease login to create content