Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

RV320 - easy vpn - iPhone - stops after fee minutes

Hello,

i've been trying to setup an easy vpn with my RV320 and an iPhone 5s (all on latest firmware)

I can connect and access the local devices so that seems to be working. The problem is that after 5 to 7 minutes of no data over the VPN the connection is reset by the router. It is given me an error that the remote client is not responding therefore declaring the connection "dead".

Does anyone have a solution for this problem?

Thanks a lot,

Lukas

1 REPLY
New Member

The error message I'm getting

The error message I'm getting is:

2016-01-01, 14:01:58 VPN Log [grpips0][7] 0.0.0.0/0=== ...109.33.9.231===192.168.5.170/32 #10: [Tunnel Negotiation Fail] DPD: No response from peer - declaring peer dead
2016-01-01, 14:01:58 VPN Log [grpips0]: cmd=down-client peer=109.33.9.231 peer_client=192.168.5.170/32 peer_client_net=192.168.5.170 peer_client_mask=255.255.255.255
2016-01-01, 14:01:58 VPN Log ip route del 192.168.5.170/32 via 62.45.92.1 dev eth1 metric 35
2016-01-01, 14:01:58 VPN Log iptables -t nat -D vpn -d 192.168.5.170/32 -j ACCEPT
2016-01-01, 14:01:58 VPN Log iptables -t nat -D vpn -s 192.168.5.170/32 -j ACCEPT
2016-01-01, 14:01:58 VPN Log iptables -t nat -D vpn_postrouting -d 192.168.5.170/32 -j ACCEPT
2016-01-01, 14:01:58 VPN Log iptables -t nat -D vpn_postrouting -o eth0 -s 192.168.5.170/32 -j ACCEPT
2016-01-01, 14:01:58 VPN Log [grpips0][7] 0.0.0.0/0=== ...109.33.9.231===192.168.5.170/32: [Tunnel Disconnected] instance with peer 109.33.9.231 {isakmp=#0/ipsec=#0}

hope this helps

149
Views
0
Helpful
1
Replies