I believe that you can change the IP address and Subnet mask by navigating to Setup > Network. The Network page opens. In the Multiple Subnet Table, click the radio button for VLAN1 (the default VLAN), and click Edit. The DHCP Setup page opens. You can edit the device's IP address and Subnet mask in the Device IP Address field and Subnet Mask drop-down list. Click Save to save your changes.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...