Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

RV320 problem with VPN connect (BUG)

forgive for bad English

Today I bought and I adjusted RV320, at once I saw some problems.

Firmware last

Cisco RV320 Configuration Utility.png

1. I adjusted two VPN tunnels between RV320 and two RV-082

Cisco RV320 Configuration Utility.png

also I saw what not one tunnel in Web panel not connect.

I many times pressed, the condition didn't change!

Having made Ping on 192.168.1.1 computers in a network 192.168.1.0 I saw answers:
Безымянный.png

it is simple a miracle or huge BUG.

2 The second BUG, VPN tunel No. 2 doesn't work in general as don't kick. And before there was RV-042G and RV-82 and everything was OK

From log:

2013-08-29, 21:47:28VPN Log[g2gips1]: cmd=down-client peer=78.31.177.145 peer_client=192.168.2.0/24 peer_client_net=192.168.2.0 peer_client_mask=255.255.255.0
2013-08-29, 21:47:28VPN Logip route del 192.168.2.0/24 via 178.216.123.65 dev eth1 metric 35
2013-08-29, 21:47:28VPN Logiptables -t nat -D vpn -s 192.168.0.0/24 -d 192.168.2.0/24 -j ACCEPT
2013-08-29, 21:47:28VPN Logiptables -t nat -D vpn -s 192.168.2.0/24 -d 192.168.0.0/24 -j ACCEPT
2013-08-29, 21:47:28VPN Logiptables -t nat -D vpn_postrouting -s 192.168.0.0/24 -d 192.168.2.0/24 -j ACCEPT
2013-08-29, 21:47:28VPN Logiptables -t nat -D vpn_postrouting -o eth0 -s 192.168.2.0/24 -d 192.168.0.0/24 -j ACCEPT
2013-08-29, 21:47:37VPN Log[g2gips1] #14: [Tunnel Established] sent MR3, ISAKMP SA established
2013-08-29, 21:47:38VPN Log[g2gips1]: cmd=up-client peer=78.31.177.145 peer_client=192.168.2.0/24 peer_client_net=192.168.2.0 peer_client_mask=255.255.255.0
2013-08-29, 21:47:38VPN Logip route add 192.168.2.0/24 via 178.216.123.65 dev eth1 metric 35
2013-08-29, 21:47:38VPN Logiptables -t nat -I vpn -s 192.168.0.0/24 -d 192.168.2.0/24 -j ACCEPT
2013-08-29, 21:47:38VPN Logiptables -t nat -I vpn -s 192.168.2.0/24 -d 192.168.0.0/24 -j ACCEPT
2013-08-29, 21:47:38VPN Logiptables -t nat -I vpn_postrouting -s 192.168.0.0/24 -d 192.168.2.0/24 -j ACCEPT
2013-08-29, 21:47:38VPN Logiptables -t nat -I vpn_postrouting -o eth0 -s 192.168.2.0/24 -d 192.168.0.0/24 -j ACCEPT
2013-08-29, 21:47:38VPN Log[g2gips1] #15: [Tunnel Established] IPsec SA established {ESP=>0x102b2557 < 0xc23b7d0f}


What problem i'm undersdund.

3 The third BUG, adding or changing VPN tunnels, against for a second there is a form for addition of the new tunnel, why it? ? ?

Безымянный.png

Everyone's tags (4)
1 REPLY
New Member

Re: RV320 problem with VPN connect (BUG)

A little later...

I solved reset all settings to default and to adjust from scratch, all work. 

What is done? I don't understand.

.

2066
Views
0
Helpful
1
Replies