RV320 to RV320: Is it possible to Load Balance using two VPN's?
Dear support community:
We're on a lab setting connecting two Cisco RV320 routers together via their WAN ports. We have one VPN Tunnel up and running, but we're wondering if there's any way you could connect a second VPN tunnel to the same remote LAN and do Load Balance between both connections.
We know it's possible to have a second VPN tunnel as backup, but we're not able to configure load balance between two tunnels.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...