RV320 WAN-port to another LAN-port forwarding, not possible?
I’m about to join the Cisco family by buying a RV320.
But I haven’t find out if it can fulfil my needs, my old ASUS router can forward a request coming in from the WAN-side on a specific port (e.g. 800) to a IP-address AND different port on the LAN-side (e.g. IP 192.168.1.50 port 500).
I as fas as I can understand this not possible on the RV320,It can just forward the incoming port to a IP-address on the LAN-side but always same port.
I have read manuals and tested Emulator and can not find out how to configure to make this happen
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...