RV320 - WAN1 PPPoE Status: Connected (Inactive)

[andreig1978]

Hi all,

As stated in the subject my Wan status appears as Connected (Inactive).

Other than that everything seems to be working fine.

Any ideeas?

I am using the latest firmware v1.1.1.06 (2013-12-06, 11:02:37) and the router is establishing a PPPoE connection through a GPON.

Thank you,

Andrei

[andreig1978]

Hi,

In case someone stumbles into the same issue, my problem was with the "Network Service Detection" which was set by default to ping the default gateway - it didn't work in the case of my ISP.

I changed it to ping Remote Host: 8.8.8.8 and the status is now Connected.

Best,

Andrei

[mpyhala]

Andrei,

Thank you for sharing the fix.

- Marty