Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RV320

Hi All

 

Please go easy on me here as Mitel is not my forte... We have a remote site that connects back the main site using a gateway to gateway VPN connection,(HQ 5505) (Remote 877) this is where our Mitel 3300 is located. At the remote site we have 2 vlans, data and voice and one Cisco router 877.

 

We are upgrading our ADSL connection to BT infinity fibre broadband (VDSL) and we need to purchase Cisco cable Router.

 

my question is our current router hands out the following DHCP options...

 

ip dhcp pool DATA

   network x.x.x.x 255.255.255.0

   default-router x.x.x.x

   dns-server x.x.x.x

   option 130 ascii "MITEL IP PHONE"

   option 132 hex 0000.0002

   option 133 hex 0000.0005

   netbios-name-server x.x.x.x

   netbios-node-type h-node

   domain-name e.g.com

!

ip dhcp pool VOICE

   network x.x.x.x 255.255.255.0

   default-router x.x.x.x

   dns-server x.x.x.x

   option 128 ip x.x.x.x

   option 129 ip x.x.x.x

   option 130 ascii "MITEL IP PHONE"

   lease 30

 

But the Router I am looking at is the RV320 only provides, please see attached image... So my question is will these DHCP options TFTP Server IP Address be enough for the phones to connect back to the controller?

 

Any help would be greatly appreciated.... or even recommending a different Cisco model..

1 REPLY
New Member

Hi jbcom4101,

Hi jbcom4101,

From the link below, it does not look like that will be enough.  Take a look...hopefully it helps.

http://www.mitelforums.com/articles/3300/Mitel-3300-DHCP-Options.php

47
Views
0
Helpful
1
Replies
CreatePlease login to create content