Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RV325 Needs Daily (or more) Rebooting

I recently upgraded my SMB gateway to an RV325.  It still has a generally basic configuration with NAT for internal access to the Internet and forwarding of just three protocols to a single internal IP.  The device needs to be rebooted daily or more frequently.  It works perfectly for a while after reboot, but eventually it will begin to redirect all internal traffic bound for the Internet to the forwarded IP address??  On occasion the router will simply stop responding and again work well (for a while) after reboot.

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

This sounds like a firmware

This sounds like a firmware bug for sure.  Try upgrading/downgrading to a different firmware version and see if you can get better results.  And don't be afraid to downgrade.  Firmware versions are more like 'feature sets'
 

Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com
3 REPLIES

Hi, It's definitely sounds

Hi,

 

It definitely sounds like routing problem. A loop maybe or something else happening. I would suggest you to call the support line. They can have a look on your router configuration and your topology. Hereby the contact details:  http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html

 

Regards,

Kremena

 

 

Bronze

This sounds like a firmware

This sounds like a firmware bug for sure.  Try upgrading/downgrading to a different firmware version and see if you can get better results.  And don't be afraid to downgrade.  Firmware versions are more like 'feature sets'
 

Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com
New Member

I would also check that you

I would also check that you don't have port mirroring enabled:

http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv320/administration/guide/en/rv32x_ag_en.pdf

Page 69.

1128
Views
0
Helpful
3
Replies
CreatePlease login to create content