Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

RV325 router firewall access rules have not effect on network traffic

I have tried to restrict network access with single destination IP deny rules that have no effect on traffic. I have a RV325 with the latest firmware 

Firmware Version:v1.2.1.13 (2015-05-04, 18:40:51)


Even when I added deny all rule #1 (see attached file), nothing is effected. Am I doing something wrong or is this something wrong with the router? I have work for years with other firewall tables and my RVS4000 worked the way I expected until I replaced it with this.

Access Rules Table
Items 1-5 of 8 per page
 PriorityEnableActionServiceSource InterfaceSourceDestinationTimeDay
DenyAll Traffic [1]*AnyAnyAlways 
 AllowAll Traffic [1]LAN192.168.3.1/ 
 AllowAll Traffic [1]LAN192.168.2.1/ 
 AllowAll Traffic [1]LAN192.168.4.1/ 
 DenyAll Traffic [1]USB1AnyAnyAlways





  • Small Business Routers
New Member

I've just tried this on my

I've just tried this on my RV320 running v1.2.1.13 and it appears to have worked OK, I couldn't connect to anything outside of my test LAN and the RV320 logs showing all the traffic being blocked.



New Member

Same router, same firmware

Same router, same firmware and ... same bug!