Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

RV325 w/Multiple Outside IP Addresses and Multiple Mail Servers

I'm moving a client from a ISA500 which "appeared" to be easier to setup Port Forwarding from multiple outside IP addresses to 2 different internal mail servers.

I'm confused about how to setup this same configuration on a RV325. Port Range forwarding has fewer options than I'm used to.

Any help would be appreciated.

Thanks.

Everyone's tags (1)
3 REPLIES
Community Member

Hello!Have you checked out

Hello!

Have you checked out this article entitled, Port Forwarding and Port Triggering on RV320 and RV325 VPN Router Series?

Link to article here:

http://sbkb.cisco.com/CiscoSB/ukp.aspx?login=1&pid=2&app=search&vw=1&articleid=4159

I hope that helps with what you are trying to do.

Please contact me if you have any questions.

Thanks,

Rocket

 

Community Member

I have seen that article, but

I have seen that article, but it doesn't address multiple public IP (outside) addresses going to different private (internal) addresses.

 

IE: mail.abc.com (port 25) coming in on 1.1.1.1 going to 192.168.1.1 and mail.def.com (port 25) coming in on 1.1.1.2 going to 192.168.1.2.

Community Member

If you want to enable port

If you want to enable port-forwarding from multiple outside IP addresses to multiple internal IP address destinations, you need to follow the steps I outlined here:

 

https://supportforums.cisco.com/discussion/12216481/rv320-port-forwarding-specific-wan-ip

1548
Views
0
Helpful
3
Replies
CreatePlease to create content