We are using an RVS4000 and are quite happy with it. The only thing that limits us is the capacity of port forwarding using Single Port Forwarding plus Port Range Forwarding. It would be useful if we had just a few more forwarding slots.
Is it possible to use TWO RVS4000s in parallel? We would connect them to separate static IPs on their WAN side and feed a common Ethernet LAN on the LAN side. We don't want to upgrade to a high end router.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...