Is there a way to block an entire country of IP addresses? My client does not need any international traffic - but specifically would like to block China. In reference to http://www.countryipblocks.net, they can generate a list. Is there any way to import this into the RVS4000?
# Country: CHINA # ISO Code: CN # Total Networks: 4,036 # Total Subnets: 330,320,384 # LEGEND: Cisco ACL
If this isn't possible, then is there a way to only allow a port forward based on a domain name?
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...