RVS4000 drops internet connectivity and fails to respond to access requests to the router webpage
My router is set up as a gateway. I was using dhcp and am now set up as static ip's. After being connected to my internet (PPPoE) for about an hour (usually less), the router stops passing internet traffic and fails to respond to access requests to communicate to the router via it's http interface. It will still allow traffic between devices on the same segment though. I tried with dhcp and without, IPS on and off, firewall on and off. I tried different keep alive times. Nothing seems to work. Help.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...