has anyone experienced the problem of having the incoming table log empty? I can get entries on the outgoing table but the incoming is always empty. I'm running the latest firmware and I tried everything I could but I don't get one single entry on the incoming table.
Are you using this as an endpoint firewall or is it behind some other device that is being used as a firewall? Are you using the intrusion protection and if so what signature? I am trying to get a feel for what exactly you have setup on the router.
As to why it is not receiving any logs with the current firmware, I am uncertain of why your not seeing any logs. If you would like you can call the SBSC at 866-606-1866 and see if they can further troubleshoot with you and help you fix this issue.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...