I have a RVS4000 router with the V22.214.171.124 firmware. Static IP's on the WAN with default settings. The issue is we are getting strange upload/download speeds and our ISP says that out WAN connection should be set to Full Duplex. But their isn't an option to change it and it reports itself at half duplex. I can't find a way to change it. Let me know what I can do or if anyone has any questions. Thanks!
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...