i have a little problem with the configuration of my rvs 4000 router;
1 - I have purchased 8 static ip address with my adsl contract, from 18.104.22.168 to 22.214.171.124
2 - wan settings of my rvs4000 are like below:
3 - now my problem; i have already configured several port fowarding using "single port forwarding" function of my router but with this metho i can only forward internet request arriving to 126.96.36.199. How can i do port forwarding for my other ip addresses?
With this router, you will not be able to port forward to those public ip addresses. This router does not support that function. What you would need is one of our rv series routers, like the rv042, rv082, or the rv016. With these devices you can do what is called one to one nat and reference a public address to a private address behind the firewall. The rvs4000 router does not have that function.
You need the RV0 series routers to do 1 to 1 nat. The you can only use one static ip address with the RVS4000. If you need more than one static ip address mapped to internal severs, you will need the 1 to 1 options that are in the RV042, RV082,RV016 routers.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...