I have an RVS4000 running firmware 22.214.171.124. I am trying to forward the ports for a Grandstream UCM6100 PBX. I have these configured but no audio on my calls. So I used PF Port checker and canyouseeme.org as suggested in this forum. The result the ports are NOT being forwarded. The RVS says they are but fails these tests. I am on Telus DSL with a static IP. No other routers on my network. Any help would be very much appriciated!!!
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...
Article ID:541 Firmware Upgrade on RV016, RV042, RV042G, and RV082 VPN
Routers Objective To upgrade the firmware, a specific file must be
downloaded from the Internet and uploaded to the device. Firmware
upgrades can fix software bugs, improve features, a...