03-10-2012 10:59 AM
Hello
I have recently purchased a RVS4000 VPN Router and I have a slight problem I wish an expert to help me with.
At home I have a 100Mbps internet connection which gets a result of around 80-98Mbps on the speedtest.net . However, when I connect the RVS4000 to my network I can only achieve 20Mbps. I am using Cat 6 cabling for everything with Gigabit ports. The QoS / bandwidth settings are disabled.
Any ideas what could be causing the slow down?
Regards
Chris D
03-10-2012 11:31 AM
Disable IPS and re-test.
Sent from Cisco Technical Support iPhone App
03-10-2012 01:08 PM
Hi Doug
I’ve tried it and it works perfectly!!!
Cheers
CD
03-10-2012 06:54 PM
IPS is resource (CPU) intensive. We used it for years with a WRVS4400N v2 and now with an SA540. Even with the more expensive SA540 we our WAN throughput is limited to ~24Mbps. We pay for 30Mbps down and 5 Mbps up so we aren't losing much.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide