RVS4000 problems

[Ben__1642]

Hello

I have recently purchased a RVS4000 VPN Router and I have a slight problem I wish an expert to help me with.

At home I have a 100Mbps internet connection which gets a result of around 80-98Mbps on the speedtest.net . However, when I connect the RVS4000 to my network I can only achieve 20Mbps. I am using Cat 6 cabling for everything with Gigabit ports. The QoS / bandwidth settings are disabled.

Any ideas what could be causing the slow down?

Regards

Chris D

[doug_counsil]

Disable IPS and re-test.

Sent from Cisco Technical Support iPhone App

[Ben__1642]

Hi Doug

I’ve tried it and it works perfectly!!!

Cheers

CD

[doug_counsil]

IPS is resource (CPU) intensive.  We used it for years with a WRVS4400N v2 and now with an SA540.  Even with the more expensive SA540 we our WAN throughput is limited to ~24Mbps.  We pay for 30Mbps down and 5 Mbps up so we aren't losing much.