I'm trying to set-up a small home network, and need to connect two devices directly with each other over two ports, where one device should also be able to communicate with the other ports or devices on the network.
I'm having 4 ports on the router. Port 4 should only communicate with port 1, whereas port one should be able to communicate with all the other ports (2 and 3).
Is it possible to restrict the port communication / access? What's the best way and how to set it up?
I have one more question. Can the RVS4000 act as a Radius client using Protected Extensible Authentication Protocol (PEAP)?
Hope that someone can help me out with this one! Thanks!
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...