RVS4000 upgrade seems to work but version is still V184.108.40.206
I'm pretty happy with my router RVS4000. It was version V220.127.116.11 and the latest version is V18.104.22.168 so I updated but after going through all the steps, the version is still V22.214.171.124. What happened? I did it again - same result. Everything seems to be working. Why doesn't the version change?
Another question. I would like to run the command line on the router. Is this possible with the RVS4000? I think not. What router would you recommend?
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...