The Protectlink URL page on the SA520 will show you how many times a filter instance has been blocked. I would also like to be able to see which client IP address was responsible. Their is a Protectlink page in the loggs section, but even though I am seeing instances blocked on the URL page, the log page shows no info at all. Is it possible, or how can I view more logging info regarding Protectlink? Can it show me a client IP address that caused the block?
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...