It is easy to setup a Wi-Fi router in a very easy way. It is very simple to use the Wi-Fi connection in case your PC had 192.168.0.l a wireless network card. To be able to set up a wireless router, you should go along with the guidelines delivered by the router manufacturer. The actual recommendations are going to be presented in printed format plus in a compact disc. You can get the software via internet on top of that.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...