For some reason it is not possible to setup a connection with my adsl service provider. Attached 2 configs that were not working. My SP provided me with the following information but I don't were to start.
Wan Type: PPPoE
line Modulation mode: Multimode
Data Encapsulation: LLC
Scheduled Type: UBR
Can somebody help me working out a working configuration.
I figured it out by myself. The authentication protocol was not PAP but CHAP. Also there was a time-out on the line which SCARLET repared. Because the line is PSTN and not ISDN I had to take an other CISCO modem. We decided to take the CISCO SBS 107 ADSL.
Here folows the config that worked. Hopefully it will be a help to many.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...