I have RMA'd my WRV210 router, and received the new unit, however I don't want to upload the old config in fear of it currupting the router. I previously had the router setup as a trapsnparent bridge where all wired/wireless LAN traffic got DHCP leases from the network, and passed all traffic.
I cant remember how to set it up again, and can't find any option to setup as bridge again. the LAN keeps showing different IP address and won't let me set the LAN the same IP address as the internet setup. stating: "The IP Address falls in the same subnet as your LAN IP address".
anyone got a link to setting up bridge mode for the router, all google searches keep stating to flash over cisco with DD-WRT to successfully use bridge mode. or cisco links disccussing the difference between router/bridge but not actualy documentation on how to change it.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...