So I purchased a SR-520-FE-K9 to be used as a VPN endpoint to a RV042 VPN Server. I have set undreds of Site-To-Site VPN tunnels up with no problem... Untill I recieved my new purchase... Before purchasing I took a quick look at the Cisco Configuration Assistant and thought I could just "add" a VPN tunnel, I didn't really take the time to check it out becuase why would such a nice router with a neat custom software not be able to configure a ipsec vpn tunnel.
So here is what I ask.. am I missing something?
Is this guide the only resource to adding a ipsec vpn tunnel?
Thank you for your reply. This would still seem to be missing a configuration section on site-to-site ipsec vpn... OTHER than users using multiple like products that can be managed in the multisite manager OR users using cisco Easy VPN.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...