I have SRP 527w and I am having a number of issues 1. I cannot connect and print to printers from MacOS platforms regardless of the combination of connection - wired wired /wireless wireless or wired wireless. I have seen the knowledge based statements from Andy Hickman saying that bonjour is not supported ... Van you advise when it will be and what m options are at the moment ( BTW windows printing works) 2. Are there Any SIP config guides around as I want/ need to set this box up wit a local SIP provider 3. Will the SRP527 support wifi connected sip clients ? Cheers mark
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...