11-07-2011 06:57 AM
Hi
Im unable to upgrade the firmware on the SRP546W
The admin guide states goto Administration > Firmware Upgrade > Choose File > Browse > Click Upgrade
There is no such item to select in the Administration section
All I have in the administration section is
Remote Management
Time Setup
User
Any ideas?
Also was wondering if it is possible to change the Annex B version I have to Annex A if I bring it back to England?
Thanks
Graham
11-07-2011 06:59 AM
Hi,
It looks like you have logged in with the "user" account (cisco).
Please log in as administrator (admin/admin) and you should see the menus you need.
Regards,
Andy
11-07-2011 07:08 AM
Doh!
Thanks Andy
Is the Annex change possible ?
Graham
11-07-2011 08:55 AM
Hi Graham,
Annex A and B operation is set by hardware filters in the SRP547 and SRP546 models respectively. This cannot be set in configuration.
Cheers
Andy
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: