Hello, I'm having some troubles to configure vlan's on my RV082 Router. I have a Windows server with Active Directory, so I installed it on VLAN 1, but any other PC's out of VLAN 1 can't reach it, for example VLAN 2, 3 etc. So How must I to configure te VLAN's to get visibility from the server on all VLAN's? If I don't do this, all PC's can't login on Active Direcory Domain.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...