I have a pair of RV042 with a gateway to gateway VPN running.
Every few hours we loose access to the LAN on the other side of the VPN. The VPN shows as connected at both sides, however no traffic will flow, pings time out etc. Hitting disconnect will make the pair reestablish the connection and it will work again for another few hours.
On the latest firmware at both ends, here is a snapshot of my VPN setup with IP and key blanked.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...