site 1 has a sonicwall tz210n setup and site 2 has the cisco wrvs4400n. a site to site vpn is setup and working great for data access. problem i have now is that site 2 voip phones will random display "poor lan connection" throughout the day. site 1 has the main phone system hardware for the two sites to connect to each other so the voip phones on site 2 will work as though it was located at site 1. the logs on my sonicwall doesn't show any disconnection or issues with the vpn. the "poor lan connection" is due to some connection issue from site 2 to site 1. i have been told that the Cisco WRVS4400N has a limited 2-3 mpb over VPN. could this be the issue?
anyone have any suggestion on this issue and any fix / suggestion would be greatly appreciated.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...