We just recently moved our systems to a new building. We have an existing network that we sending to the internet port on the VR042. We have a server and a 24 port switch connected to the VR042. We have about 10 clients on the switch. the clients can all see the server and log on to their accounts. However, the server can not access the internet not can any of the clients. We are also unable to logon to the VR042. This setup worked in our previous location, but it was connected directly to the cable modem as the internet connection to the VR042. Without the server and switch on the VR042 we were able to access the admin functions of the VR042 and the interent.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...