I need to allow WOL packets through a Cisco 870W router. Its running IOS version 12.4(9)T
The WOL magic packet will be coming from VLAN1 (192.168.2.0/24) and going to FastEthernet4 (192.168.6.0/24).
The WOL application sends UDP packets on port 9
Here are the relevant running-config sections
ip address 192.168.2.30 255.255.255.0 no ip redirects no ip unreachables ip directed-broadcast no ip proxy-arp ip route-cache flow ip tcp adjust-mss 1452
ip address 192.168.6.1 255.255.255.0 ip helper-address 192.168.2.1 ip helper-address 192.168.2.10 no ip redirects no ip unreachables ip directed-broadcast no ip proxy-arp ip route-cache flow duplex auto speed auto no cdp enable
I've also found documents recommending I add
ip forward-protocol udp 9
which I've added and still nothing. Can anyone tell me why this is not working?
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...