I see that you have attempted to forward the magic packet for WOL through the WRVS4400N, and it did not work. I am honestly unsure as to whether or not the WRVS4400N supports Wake-on-lan, but I did want to ask if you've attempted to achieve this by using a vpn tunnel or the quickvpn software, since that is the alternative to forwarding the port.
I tried doing this after doing a VPN, but doesn't seem to work. I can log into a system that I keep powered on after doing a VPN. But I still wil have to keep a sysem ON all the time. I wish there was a feature on the router just to accept these packets without having a dedicated system ON all the time.
As I said I tried port forwarding on the router, but it didn't make any difference.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...