Wireless Isolation (within SSID): From the Wireless Isolation within SSID drop-down list, choose Enabled to allow communication and file transfers between all wireless PCs that are connected to this SSID. This feature is useful when setting up a wireless hotspot location. Choose Disabled (the default option) to prevent communication and file transfers between the PCs.
AP Isolation: This feature isolates all wireless clients and wireless devices on your network from each other. Wireless devices can communicate with the Router but not with one another. To use this function, click Enabled. AP Isolation is disabled by default.
Wireless Isolation (within SSID): is Disabled by default: any wireless PCs associating on the same SSID is able to communicate with each other. If enabling this feature, any wireless PCs associating on the same SSID will be prevent from communicating with each other. This feature is very useful in a Wireless Hotspot environment. Enabling Wireless Isolation (within SSID) will prevent (block) any wireless client associating on the same SSID from communicating each other.
AP Isolation: is enabled by default, when setting up multiple SSIDs, PCs that are associated on different SSIDs will be unable to communicate with each other. However, if AP Isolation is disabled, PCs associated on different SSIDs will be able to communicate with each other. Configuring AP Isolation (Wireless Isolation between SSIDs) has nothing to do with multiple VLANs.
The documentation seems to be conflicting. However with the router by enabling the Wireless isolation it turns on the feature and with the AP isolation it is enabled by default to separate the ssids. If you want them to communicate just disable that feature.
Both are correct. The wireless isolation within SSID governs whether clients with the same SSID can see each other, whereas AP Isolation governs whether clients with different SSIDs can see each other.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...